Screen printing squeegee blade 7mm 60 Shore A

The screen printing squeegee blade is mounted in a squeegee holder and forces ink through the mesh openings in the image areas of the stencil onto the substrate.

With a thickness of 7 mm and a hardness of 60 Shore A, this product is suitable for jobs requiring a soft, flexible blade and prioritizing ink transfer through the mesh. When combined with suitable ink, mesh and stencil specifications, it supports thick ink deposits and selected decorative effects on textiles.

Key Features

60 Shore A Hardness – Soft and Flexible

60 Shore A falls within the soft squeegee hardness range and flexes more readily than 65, 70 or 75 Shore A blades under equivalent conditions. This characteristic suits jobs requiring high flexibility. Adjust pressure appropriately to prevent excessive blade flex.

Supports Higher Ink Deposition and Thick Ink Deposits

Soft blades generally deposit more ink than harder blades under equivalent conditions, making them suitable for jobs requiring thick ink deposits. Actual ink film thickness also depends on the mesh, stencil, ink properties and operating parameters.

7 mm Thickness – Suitable for Manual Operation

Compared with a 9 mm blade of the same material and hardness, mounted in the same way, a 7 mm blade generally flexes more readily. When paired with a compatible handle, it can be selected for manual printing and short runs requiring flexible control of the printing stroke.

Supports Coverage and Color Reproduction

An appropriate ink deposit helps achieve the required coverage and color. This product is an option to consider when ink deposition takes priority over fine detail. Results also depend on ink properties, fabric background color and stencil quality.

Suitable for Selected Special-Effect Applications

The blade can be used with certain glitter, metallic and puff inks requiring higher ink deposition. Follow the technical guidelines for the specific ink system and use suitable mesh and stencil specifications to achieve the intended effect.

Technical Specifications

Screen Printing Applications

▫ Textile and garment printing: Suitable for jobs prioritizing ink deposition, coverage and color reproduction.

▫ Manual printing and short runs: An option for sample printing and small production runs using a compatible squeegee handle.

▫ Thick ink deposits: Supports jobs requiring greater ink deposition when combined with suitable mesh and stencil thickness.

▫ Glitter and metallic printing: Use when 60 Shore A hardness meets the ink system’s technical guidelines.

▫ Puff printing: Can be considered for processes requiring higher ink deposition, while following stencil and curing requirements.

Compatibility note: A hardness of 60 Shore A does not, by itself, determine resistance to inks or solvents. Check the specifications of the exact blade material grade before use.

Selection and Use Guidelines

▫ Select according to ink deposit requirements: Run print trials to assess ink deposition, coverage and effects before production.

▫ Adjust squeegee pressure: Avoid excessive pressure that causes the soft blade to flex too much, affecting the working angle and ink control.

▫ Select the correct blade holder: Ensure that the holder accommodates the 7 mm thickness and grips the blade securely and evenly along its entire length.

▫ Control blade protrusion: Avoid excessive protrusion, which allows the blade to bend too readily and changes its working behavior during the printing stroke.

▫ Select suitable mesh: For glitter or metallic inks, select mesh openings according to particle size and the ink manufacturer’s guidelines.

▫ Distinguish thick ink deposits from high-density printing: Sharp-edged high-density printing may require a harder or multilayer squeegee blade to control the printed profile.

Cleaning and Storage

▫ Remove excess ink and clean the blade with a suitable cleaning agent after use.

▫ Avoid prolonged soaking in solvents or the use of highly aggressive chemicals.

▫ Allow the blade to dry and recover after chemical exposure before reuse or sharpening.

▫ Sharpen only when the blade is dry and the material is suitable for reconditioning by sharpening.

▫ Store in a cool, dry place away from direct sunlight and heat sources. Avoid conditions that bend the blade or place pressure on the printing edge.

▫ Rotate squeegee blades during continuous production to allow time for rest and inspection.

Appropriate cleaning, printing-edge maintenance and adequate recovery time help protect the blade and support consistent print quality.