Screen printing table adhesive (Water-based & Oil-based)

Water-based and oil-based screen printing table adhesives are used to hold fabrics in position during production. The adhesive layer helps prevent fabric slipping or shifting during handling, supporting consistent print positioning, particularly in multicolor printing.

Water-based and oil-based pallet/table adhesives offer strong adhesion, good water resistance, and long-lasting tack for use on screen printing tables and pallets.

Key Features

1. Strong Adhesion

Keeps fabrics securely positioned on the printing table, helping prevent slipping or shifting during printing and screen lifting.

2. Good Water Resistance

According to the product information, the adhesive maintains stable adhesion with limited influence from moisture.

3. Long-Lasting Tack

Reduces the need for frequent adhesive reapplication, helping minimize production interruptions.

4. Fast Drying When Heated

According to the supplied documentation, the adhesive dries quickly at elevated temperatures, helping reduce waiting time between operations. Heating temperatures and methods must follow the product-specific instructions.

5. Suitable for Large-Format Printing

Provides fabric hold-down over large printing areas for high-volume orders and industrial production.

Product Information and Packaging

Applications

Used to hold fabrics in place on screen printing tables or pallets, helping maintain product positioning during printing.

Suitable for large-format printing, multicolor printing, and high-volume production. Test adhesion on each fabric type to confirm suitability before full-scale use.

General Instructions for Use

1. Surface Preparation

Remove dust, lint, and any old adhesive that is no longer suitable. Allow the table surface to dry before application.

2. Adhesive Application

Apply a thin, even layer using the method and tools recommended by the supplier.

3. Tack Check

Allow the adhesive to reach its usable condition according to the product instructions, then test on a fabric sample before starting production.

4. Fabric Placement and Printing

Lay the fabric flat on the table and press it down gently for even contact with the adhesive. Avoid stretching or wrinkling the fabric.

5. Adhesive Reapplication

When adhesion decreases, inspect the surface and remove accumulated lint before deciding whether to apply more adhesive.

Use and Storage Precautions

Do not dilute with water or solvent without appropriate instructions.

Test adhesion, fabric release, and the potential for adhesive residue on the product before use.

Keep the container tightly closed after use. Follow the product label and safety data sheet for storage, ventilation, and fire-prevention requirements.

Do not heat the adhesive or place it near heat sources without confirming safe operating conditions.