Hot stamping foil - Holoshine Gold W-38

Code: W-38 Holoshine Gold (HG 12-2 Holoshine Gold)

Size: 60cm x 120met, 30cm x 120m

Weight: 0.8kg~1.6kg

Technical data​: 16mic.

Guide used: to get into the printing purpose, please see the some advice:

Temperature: 110~140℃

Speed: 20m / minute

1. Control the tension of film winder and rewinder

2. Coating adhesive layer on stamping foil and through heat chaber to harden

3. Check temperature and pressure since temperature can be lower than your adjustment(even if you set optimal temperature) under high speed and continuous working condition.

4. Wait until the textile ripen completely in ripen room (about 24 hours), then release the PET film.

※ Stay away from heat above 90℃ after finishing the work, since high heat might cause

color migration. If you need to iron, please cover it with thin fabric